Waterproof KN95 FFP2 Disposable Face Mask 5 Ply Filtering Half Mask Protective Facial Mask Bfe>95%
1. Daily protection in filtration of particles.
2. It is used in non-medical environmental.
3. It is not used in protection against gases and vapors.
4. It is not used in oxygen deficit environment,underwater operation, escape or fire protection.
1.The wearer must first be trained in the proper use and fit tested before using the respirator.
2.Inspect respirator before each use to ensure it is in good working condition. Examine all the respirator parts for signs of damage including the ear loop,nose clip and non-woven. Please check the manufacture date and validity time, to make sure the respirator is in valid date.
3.Discard and replace respirator if it becomes damaged or breathing resistance becomes excessive.
4.Do not alter,wash,abuse or misuse this respirator.
5.Failure to follow all instructions and warnings on the use of this respirator and/or failure to wear this respirator during all times of exposure can reduce respirator effectiveness and may result in illness or permanent disability.
Storage Condition & Shelf Life
Shelf life of unopened product is 3 years from date of manufacture when stored within temperature range of -20ºC to +30ºC and at less than 80% relative humidity.
This respirator contains no components made from natural rubber latex.
Instruction for use
1. Open the packaging bag and take out the mask.
2. Place the side with nose piece upward. Hang the ear loops on the ears.
3. Press the nose piece to fit the bridge of the nose, then press the nose piece and pull the lower end of the mask to the lower jaw.
4. Adjust the mask so that it covers the bridge of the nose to the lower jaw in order to get the best protection effect. Use the plastic buckle to connect the loops for better fit.
With certification, you can be more assured
EN149:2001+A1:2009 FFP2 NR
Guangdong Winsun Personal Care Products Co.,Ltd, founded in 2005, is an enterprise engaged in the production of baby diapers. The company covers an area of 240,000 square meters. Four manufacturing plants are located in Guangdong, Zhejiang, Hunan and Africa. In 2020, with the strong support of the local government, our company obtained the production license of medical devices and other qualifications, and transformed into the production of disposable hygiene face mask, disposable medical mask (non-sterile), surgical mask (non-sterile) and 3D children mask. Also, the company have 100 sets of disposable mask equipment (including two high-speed mask machines),100 sets of filtering half mask equipment and 1 set of 3D mask equipment. The company produces more than 10 million disposable masks and more than 800 thousand 3D masks per day.
So welcome every client come to visit us or contact us at any time!